型号 HP113.01

波登管压力表，铜合金，不锈钢外壳，表圆50，63，80和100

Model HP113.01

Bourdon tube pressure gauge, copper alloy, stainless steel case, gauge circles 50, 63, 80 and 100

耐振压力表的应用

适合存在脉冲或振动的严酷工作条件

适用于不会堵塞压力系统或腐蚀铜合金部件的所有气体和液体介质

液压装置

压缩机和船舶制造

Application of Vibration Resistant Pressure Gauge

Suitable for harsh operating conditions with pulses or vibrations

Suitable for all gaseous and liquid media that will not clog pressure systems or corrode copper alloy components

Hydraulics

Compressor and shipbuilding

耐振压力表的功能特性

抗振动，抗冲击

外壳坚固

量程范围：0 ... 60 MPa

Functional Characteristics of Vibration Resistant Pressure Gauge

Anti-vibration, anti-shock

Rugged housing

Measuring range: 0 ... 60 MPa

耐振压力表的描述

HP113.01型充液波登管压力外壳采用不锈钢制成，接液部分由铜合金制成。

HP113.01充液压力表符合国际行业标准EN 837-1, ASME B40.1 & GB 1226-2017对波登管压力表的要求。

由于表内有液体填充，压力元件和运动被有效地缓冲。因此，这些仪表特别适用于高动态负载点的测量，如频繁的压力波动或振动。

HP113.01充液压力表表壳标准尺寸有50、63、80和100毫米，并符合IP65防护等级。该压力表的准确度可达到1.0级，可广泛应用于工业中。

安装在控制面板时，轴向安装连接的压力表可以配备一个安装边或三角凸边及安装支架。

Description of Vibration Resistant Pressure Gauge

The HP113.01 liquid-filled Bourdon tube pressure housing is made of stainless steel, and the wetted part is made of copper alloy.

The HP113.01 liquid-filled pressure gauge meets the requirements of international industry standards EN 837-1, ASME B40.1 & GB 1226-2017 for Bourdon tube pressure gauges.

Due to the liquid filling of the watch, the pressure elements and movements are effectively cushioned. Therefore, these meters are particularly suitable for measurements at highly dynamic load points, such as frequent pressure fluctuations or vibrations.

The HP113.01 liquid-filled pressure gauge case is available in standard sizes of 50, 63, 80 and 100 mm and is IP65 rated. The accuracy of the pressure gauge can reach 1.0 level and can be widely used in industry.

When mounted on a control panel, pressure gauges with axial mounting connections can be equipped with a mounting edge or triangular flange and mounting bracket.